Kayan with Baby 001 - 3D Printed Shade

glow in the dark

(inc. VAT) (ex. shipping)

Sold Out

The Kayan lamp shade is the result of an inspired collaboration between Plumen and Italian 3D printing design specialist, Formaliz3d.

Using 3D modelling and printing, Kayan is specially designed to fit Plumen bulbs.

Its powerful simplicity of soft, sinuous shapes perfectly complements the curved silhouettes of the bulbs. The punctured sides also let the bulb’s unique silhouette shine through whilst keeping the full brightness of the light projected onto surfaces below. 

The shade comes included with a Baby Plumen 001 light bulb.

Orders placed will not be processed until 3rd September 2018 as Formaliz3d are closed for the summer. Delivery may take an additional 21 days as this shade is made to order.


  • Shade Material: ABS plastic
  • Dimensions: 220mm x 150mm x 150mm
  • Fabric Cable
  • Cable length: 1.20m 

Baby Plumen 001

  • Screw Cap E27
  • Lifetime of 8,000 Hours
  • 12 Watt
  • 585 Lumen
  • Colour Temperature 2700K (warm white light)
  • Non-Dimmable: Do not use with dimmers, motion sensors or other control devices
    • North America, Japan and certain other countries are compatible only with the 120V version.  Most other countries are compatible only with the 230V (E27) version. For a list of the requirements of each country in the world, please click the 'Country Compatibility' tab. The 120V (E26) version is sold on the US shop.
    • For a full list of technical specifications please click on the tab "Full Specification".

    The Kayan is sold with the 230V version only (E27).

    The following countries require the 120V version:

    • American Samoa
    • Anguilla
    • Aruba
    • Bahamas
    • Barbados
    • Belize (unless you have a 230V supply)
    • Bermuda
    • Bolivia (unless you have a 230V supply)
    • Brazil (unless you have a 230V supply)
    • Canada
    • Cayman Islands
    • Colombia
    • Costa Rica
    • Cuba (unless you have a 230V supply)
    • Dominican Republic
    • Ecuador
    • El Salvador
    • Guam
    • Guatemala
    • Haiti
    • Honduras
    • Japan
    • Liberia
    • Libya
    • Mexico
    • Micronesia
    • Morocco (unless you have a 230V supply)
    • Netherlands Antilles (unless you have a 230V supply)
    • Nicaragua
    • Palmyra Atoll
    • Panama
    • Puerto Rica
    • Saudi Arabia (unless you have a 230V supply)
    • Suriname
    • Taiwan
    • Trinidad & Tobago
    • USA
    • Venezuela
    • Virgin Islands

    All other countries require the 230V version of the bulb. If in doubt, please email us at


    • Shade Material: ABS plastic
    • Dimensions: 220mm x 150mm x 150mm
    • Cable length: 1.20m
    • Plumen bulb only, 11W max

    Baby Plumen 001

    • 11.5 Watt
    • 585 Lumen
    • Screw Cap (E27)
    • Equivalent to 40 W Incandescent Light bulb
    • Lifetime: 8,000 Hours
    • Non-Dimmable: Do not use with dimmers
    • Colour Temperature: 2,700K (warm white light)
    • Use in dry location only
    • Not for use in totally enclosed luminaires
    • Lamp Dimensions: 158mm x 74mm x 70mm
    • Energy Label A
    • Switching Cycles: More than 30,000
    • Warm-Up Time: Less than 30 seconds
    • Starting time: 180ms
    • Mercury Content: Less than 2.5mg
    • Luminous Flux: 585 Lumen
    • Power Factor: Greater Than 50
    • Lumen Maintenance: 75% after 6,000 hours
    • Rated Wattage: 8.8W
    • Lamp current: 62mA
    • CRI: 83
    • Power Factor: 0.57
    • Product Specification Sheet available here 
    read more